During drilling, long chips can form and get stuck on the tool. With the FANUC Removing Chips in Drill Cycle function, this can be avoided. The FANUC function ensures that during the movement to the next drilling position, the spindle rotates in the opposite direction at a preset speed and time, removing the chips from the tool.
Tel: +65-6-220 3911
Fax: +65-6-225 0098
Copyright (c) Ringier Trade.com. Copyright (c) Ringier Trade Media Ltd. (c) 2021.
All rights reserved. Reproduction in whole or part in any form or medium without express written permission is not allowed.
Ringier Trade .com (c) Ringier Trade Media Ltd., accept no responsibility or liability for any information provided by any third party on this website.